Specifications

FUEL SYSTEMS

7 Quart Fuel Tank

Removal

1. Remove air cleaner knob (1) and cover (2),

Fig. 1.

2. Remove air cleaner nut (3), top plate (4) and

element (5).

Fig. 1











3. Turn the fuel shut-off to the OFF position.

Disconnect fuel valve shut-off link.

4. Remove 2 screws (flywheel side) and 2 shoulder

bolts (PTO side) from the fuel tank.

5. Lift the fuel tank. Disconnect the fuel line from

the carburetor. Remove the fuel tank.

6. Remove air cleaner base. Disconnect the

breather tube.

7. Remove 4 screws (6) and the fuel tank base

plate, Fig. 2.

Fig. 2



8. If necessary remove 4 screws and 2 PTO side

fuel tank base supports (7), Fig. 3.

NOTE: Do not disturb the governor controls.

Fig. 3



9. If necessary remove 4 screws and 2 flywheel

side fuel tank base supports (8), Fig. 4.

Fig. 4



Installation

1. Install 2 flywheel side fuel tank base supports (8),

Fig. 4. Torque screws to 140 in. lbs. (16 Nm).

2. Install 2 PTO side fuel tank base supports (7),

Fig. 3. Torque screws to 140 in. lbs. (16 Nm).

For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983