Specifications

2LOCKED FOR PRINTING – SELECT SECT. NEEDED >

Fig. 46







Engine Wiring

1. With key switch OFF, re-connect equipment

wiring harness to engine wiring harness.

Disconnect

harness at solenoid.

2. Insert RED meter test lead (2) into GRAY wire

(1) in solenoid connector.

3. Attach BLACK test lead to a good ground, Fig. 47.

4. Turn key switch to ON position. Meter should

display battery voltage.

If meter does not display battery voltage, replace

engine wiring harness. If meter displays battery

voltage, test the solenoid.

Fig. 47





For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983