Specifications

12LOCKED FOR PRINTING – SELECT SECT. NEEDED >
173
4. Install breather deflector (4) and three screws
(3). Torque nuts and screws to 65 in. lbs.
(7 Nm).
Make sure air inlet tube (1) is installed correctly in air
cleaner base.
Fig. 37






Early Style: (Square cartridge) Fig. 38.
1. Insert mounting screws (2) through breather
deflector, base (1) and gasket.
2. Guide breather tube onto breather nipple. Install
mounting screws in carburetor. Do not tighten
screws at this time.
3. Install two air cleaner bracket screws. Torque all
four screws to 65 in. lbs. (7 Nm).
Make sure air inlet tube is installed correctly in air
cleaner base.
Fig. 38


Models 351700, 380700
1. Install new air cleaner mounting gasket with
adhesive side toward air cleaner base, Fig. 39.
2. Guide breather tube onto breather nipple. Install
air cleaner base on carburetor mounting studs.
3. Install carburetor shield (2).
4. Install nuts (3) and screws (1) finger tight.
5. Torque nuts and screws to 65 in. lbs. (7 Nm).
Make sure air inlet tube is installed correctly to air
cleaner base.
Fig. 39



Horizontal Crankshaft
Models 290400, 303400, 350400
Current Style: (Round cartridge)
1. Install new air cleaner base gasket.
2. Guide breather tube onto breather nipple. Install
air cleaner base (1) on carburetor and support
bracket, Fig. 40.
Fig. 40




3. Install two air cleaner base screws (4). Do not
tighten at this time.
4. Install breather deflector (3) and three screws
(2). Torque all screws to 65 in. lbs. (7 Nm).
Make sure air inlet tube is installed correctly in air
cleaner base.
Early Style: (Square cartridge)
1. Install new air cleaner base gasket.
2. Guide breather tube onto nipple on breather.
Install air cleaner base (1) on carburetor and
support bracket, Fig. 41.
For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com