Specifications

ManualsBrandsBriggs & Stratton ManualsTools610000

171

172

173

174

175

176

177

178

179

180

170

2. Assemble carburetor onto mounting studs,

Fig. 24.

Fig. 24





All Models

1. Connect governor link (3) to throttle lever (1).

Snap retainer (2) over link, single barrel

carburetor, Fig. 25, two barrel carburetor,

Fig. 26.

2. Install governor link spring (4) in loop on retainer.

NOTE: If the carburetor is equipped with an anti-

afterfire solenoid, route the wire under the

intake manifold and through the hole in #1

cylinder shield at this time.

Fig. 25









Fig. 26









3. Connect choke link (7) to choke lever and install

choke control bracket (5), single barrel

carburetor, Fig. 27, two barrel carburetor,

Fig. 28. Torque screws (6) to 65 in. lbs. (7 Nm).

Fig. 27







Fig. 28







4. Install fuel line and clamp.

Horizontal Crankshaft

Models 290400, 303400, 350400

1. Assemble gaskets (1), spacer (3) and

carburetor to intake manifold, Fig. 29.

For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983