User Manual

Not for

Reproduction

Features and Controls

Read this Operator’s Manual and safety rules before operating your generator.

Compare the illustrations with your generator, to familiarize yourself with the locations of various controls

and adjustments. Save this manual for future reference.

A - Rocker Switch Circuit Breaker — A double pole

circuit breaker is provided to protect the generator

against electrical overload.

B - 120/240 Volt AC, 20 Amp Locking Receptacle

— May be used to supply electrical power for the

operation of 120 and/or 240 Volt AC, 20 Amp,

single phase, 60 Hz electrical, lighting, appliance,

tool and motor loads.

C - 120 Volt AC, 20 Amp, GFCI Duplex Receptacle

— May be used to supply electrical power for the

operation of 120 Volt AC, 20 Amp, single phase,

60 Hz electrical, lighting, appliance, tool and motor

loads.

D - Oil Fill Cap — Check and add engine oil here.

E - Oil Drain Plug — Drain engine oil here.

F - Grounding Fastener — Consult your local agency

having jurisdiction for grounding requirements in

your area.

G - Spark Arrester Muffler — Exhaust muffler lowers

engine noise and is equipped with a spark arrester

screen.

H - Air Cleaner — Protects engine by filtering dust

and debris out of intake air.

J - Choke Lever — Used when starting a cold engine.

K - Recoil Starter — Used to start the engine

manually.

L - Engine Rocker Switch — Set this switch to ON (I)

before using recoil starter. Set switch to OFF (0) to

switch off engine.

M - Fuel Valve — Used to turn fuel supply on and off to

engine.

N - Fuel Tank — Capacity of 4 U.S. gallons (15.14 l).

Items Not Shown:

Engine Identification — Provides model, type and

code of engine. Please have these readily available if

calling for assistance.

Identification Label — Provides model and serial

number of generator. Please have these readily

available if calling for assistance.