Product Manual

Not for
Reproduction
5
Features and Controls
80021107
120 Volt AC, 20 Amp, Duplex Receptacle — Used to supply 120 Volt
AC, single phase, 60 Hz power for electrical lighting, appliance, tool
and motor loads.
120 Volt AC, 20 Amp, GFCI Duplex Receptacles — Used to supply
120 Volt AC, single phase, 60 Hz power for electrical lighting,
appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle — Used to supply
120 / 240 Volt AC, single phase, 60 Hz power for electrical lighting,
appliance, tool and motor loads.
Circuit Breakers (AC) — All of the duplex receptacles are provided with
“push to reset” 20 Amp circuit breakers to protect the generator against
electrical overload.
Engine Switch — Set this switch to on (I) before starting engine. Set
switch to off (0) to shut off engine.
Hour Meter — Displays and records how many hours your generator
has run (up to 9,999.9).
Low Oil Shutdown — This unit is equipped with a low oil protection
device. Oil must be at proper level for engine to run. If the engine oil
drops below a preset level, an oil switch will stop the engine. Check oil
level with dipstick.
Main Breaker — The receptacles are provided with a rocker switch
main circuit breaker to protect the generator against electrical overload.
Main Breaker
120/240 Volt AC, 30 Amp
Locking Receptacle
120 Volt AC, 20 Amp
Duplex Receptacle
Circuit
Breakers
Low Oil
Shutdown
Compare the illustrations with your generator to familiarize yourself
with the locations of various controls and product warnings.
Hour
Meter
Engine
Switch
120 Volt AC, 20 Amp
GFCI Duplex Receptacles