Specifications

4 O L Y M P I A M I L L E N N I U M – T H E N E W S T A N D A R D
5
W H A T E V E R Y I C E R E S U R F A C E R S H O U L D B E
Safe
Operation
of Propane
Powered
Olympia
Edger
1. DO NOT start or operate the edger when an odor of fuel is present or other explosive conditions exist.
2. Make sure the edger muffler is in place and operating properly.
3. Carry out periodic inspections of the muffler, clean away any debris or combustible material from the muffler area.
Replace the muffler when necessary. A defective muffler can permit an increased exhaust noise level.
4. Never operate the edger if the air cleaner or cover directly over the carburetor air intake is removed.
5. DO NOT choke the carburetor to stop the engine.
6. NEVER tamper with the preset governor springs, governor links, nor make any adjustment to the factory engine
speed presets.
7. DO NOT touch the mufflers, cylinders or fins as contact may cause burns.
8. Dirt or debris in the cooling fans or governor parts can adversely affect engine performance. Turn off engine, let
cool and then clean with a non-flammable brush.
9. Prior to starting the edger, check to make sure the blade is properly in place. A loose blade or no blade can cause
a sever kickback, making sure to remove the spark plug wire prior to checking.
10. Always keep hands and feet clear of moving parts.
11. If manual start is necessary always pull starter cord rapidly to avoid kickback.
SAFETY WARNING: If the following instructions are not followed it can result in a fire or explosion
causing personal injury.
Always keep the propane powered Olympia Edger in a well-ventilated area. If you smell propane gas make sure the
tank valve is firmly closed and make sure the area is well vented before carrying on any other work.
Using soap and water mixture on all connections locate and repair any leaks.
Operating
Safe Guards
Olympia
Edger
2
O P E R A T I N G P R O C E D U R E