Specifications

79
4
4. Check for proper alignment and any
interference issues.
5. Torque muffler nuts to listed values.
6. If equipped, torque muffler brace screw to
listed values.
REMOVE/INSTALL EXHAUST
SYSTEM (104700)
Fig. 6
To remove 104700 muffler assembly:
1. Remove the screws that secure the
muffler guard (if equipped).
2. Bend down locking tabs (A) on screw lock.
3. Remove muffler screws and muffler brace
nut ([B] Fig. 7).
Fig. 7
NOTE: For access to the exhaust elbow,
remove the blower housing, if necessary.
4. Remove backplate and gasket. SEE
SECTION 3-ENGINE DISASSEMBLY.
5. Take off the two screws (A) that hold the
exhaust elbow shield ([B] Fig. 8) and
remove shield.
Fig. 8
6. Remove the screws ([A] Fig. 9) holding
the exhaust elbow and set elbow aside.
Fig. 9
7. Inspect the exhaust system and its
components. SEE SECTION 4-
EXHAUST SYSTEMS.