Specifications

74
3
4. Install tool #19203 as shown ([A] Fig. 47)
and tighten the nuts evenly until the
flywheel comes free of the crankshaft.
Fig. 47
When the flywheel is removed, the stator and the
remaining bolt ([A] Fig. 48) for the support baffle
can be removed.
Fig. 48
OIL FILTER ADAPTERS
Remove/Replace Oil Filter Adapters
1. Remove oil filters and oil filter adapters as
shown below.
Fig. 49
2. Use a new gasket and reposition adapter.
3. Torque screws to listed value, as shown in
Fig. 50.
Fig. 50
Fig. 51