Specifications

72
3
Ignition System Removal
(050000, 085400, 086400, 115400,
117400, 118400, 235400, 245400,
161400, 104700, 260700, 261700,
28Q700)
1. Disconnect stop switch wire (A) at
armature (B).
2. Remove armature screws ([C] Fig. 40).
3. Lift off armature.
Fig. 40
FLYWHEELS
Flywheel Removal
(050000, 085400, 086400, 115400,
117400, 118400, 138400, 185400,
235400, 245400, 28Q700)
1. If necessary, remove the fan from the
flywheel.
2. Prevent the flywheel from turning with
Flywheel Strap Wrench, #19433, ([A] Fig.
41) or other strap wrench or socket-type
flywheel holder, determined above.
3. Turn the flywheel nut CCW with a 1/2 in.
breaker bar (B) and socket to remove.
Fig. 41
4. Thread the flywheel nut (A) on to the
crankshaft until top of nut is flush with end
of crankshaft threads, Fig. 42.
5. Install Flywheel Puller #19203 (B). Turn
puller screws into flywheel puller holes
until puller contacts flywheel nut.
6. Tighten puller nuts (C) equally until
flywheel loosens, (Fig. 42) and/or (Fig.44).
Fig. 42
WARNING
Eye injury could occur if flywheel is struck
with a hard object.
• Do not strike flywheel with hard object
or steel tool.
• Wear safety goggles or other eye
protection.