Install Manual

Not for
Reproduction
13
A - Standby generator enclosure
B - Mounting holes in generator base
C - Fuel inlet location
D - Entrance stub-up area
D1 x D2 - Entrance stub-up location
E - Exhaust outlet area reference
F - Concrete slab reference
WARNING Hazardous Voltage - Contact with power lines
could cause electric shock or burns, resulting in
death or serious injury.
• If lifting or hoisting equipment is used, DO NOT
contact any power lines.
• DO NOT lift or move generator without assistance.
• DO NOT lift unit by roof as damage to generator
will occur.
Lifting the Generator
Attach the generator to the slab at the four corner locations
(B) with masonry anchors as required by local code.
B
D
C
F
E
A
B
D2
D
D1
D
C
B
Proper tools, equipment, and qualified personnel should be
used in all phases of handling and moving the generator.
The approximate weight of the generator is listed in the
Generator Specifications section.
Use the lifting holes (G) in the base of the generator to lift
the generator onto the concrete pad. Lift the generator in
accordance with OSHA or local lifting regulations. Retouch
any chipped paint with supplied touch-up paint.
G