Installation Guide

36
Possible issues with Electronic Governing See Table 7 (Common faults and
their remedial actions) insidethe
online"Operation InstructionsGC1031GENSET
Controller"manual(part number80086364).
Specifications
Generator Specifications: 17kW and
20KW
* 17k Watt.
Rated Maximum Load Current*(at
25°C/77°F, LP)*: at 240 Volts
70.8Amps
Rated AC Voltage 120/240 Volts
Phase Single phase
Rated Frequency 60 Hertz
Generator Breaker 80 Amp
Normal Operating Range -20°F (-28.8°C) to 104°F (40°C)
Output Sound Level 69.1 dB(A) at 23 ft. (7 m) at normal
load
Shipping Weight 610 lb (278 kg)
* 20k Watt
Rated Maximum Load Current*(at
25°C/77°F, LP)*: at 240 Volts
83.3 Amps
Rated AC Voltage 120/240 Volts
Phase Single phase
Rated Frequency 60 Hertz
Generator Breaker 100 Amp
Normal Operating Range -20°F (-28.8°C) to 104°F (40°C)
Output Sound Level 69.1 dB(A) at 23 ft. (7 m) at normal
load
Shipping Weight 626 lb (278 kg)
* Natural gas rating will depend on specific fuel but typical
derates are between 10 to 20% off the LP gas rating.
Engine Specifications
* 17k Watt.
Displacement 60.60 ci. (993 cc)
Bore 3.405 in. (86.5 mm)
Stroke 3.366 in. (85.5 mm)
Spark Plug Gap 0.020 in. (0.51 mm)
Spark Plug Torque 180 lb-in. (20 Nm)
Armature Air Gap 0.005 - 0.008 in. (0.13 - 0.20 mm)
Intake Valve Clearance 0.004 - 0.006 in. (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.007 - 0.008 in. (0.15 - 0.20 mm)
Oil Type 5W30 Synthetic
Oil Capacity (with filter) 78 - 80 oz. (2.3 - 2.4 L)
Engine End Cover Bolt 220 lb-in (25Nm)
* 20k Watt.
Displacement 60.60 ci. (993 cc)
Bore 3.405 in. (86.5 mm)
Stroke 3.366 in. (85.5 mm)
Spark Plug Gap 0.020 in. (0.51 mm)
Spark Plug Torque 180 lb-in. (20 Nm)
Armature Air Gap 0.005 - 0.008 in. (0.13 - 0.20 mm)
Intake Valve Clearance 0.004 - 0.006 in. (0.10 - 0.15 mm)
Exhaust Valve Clearance 0.007 - 0.008 in. (0.15 - 0.20 mm)
Oil Type 5W30 Synthetic
Oil Capacity (with filter) 78 - 80 oz. (2.3 - 2.4 L)
Engine End Cover Bolt 220 lb-in (25Nm)
Not for
Reproduction