Installation Guide

24
Generator is shown with roof and access covers removed for clarity.
Legend for System Connector Locations:
(A) Lifting Holes — Provided at each corner for lifting generator.
(B) Alternator — An electrical machine that generates an alternating current
(C) Muffler — High-performance muffler lowers engine noise to comply with most residential codes.
(D) Circuit Breaker — Protects the system from shorts and other over-current conditions.
(E) Control Board — Used for generator operation control, menu start-up, and informational display functions.
(F) Air Cleaner — Uses a dry type filter element to protect engine by filtering dust and debris out of intake air
(G) Engine Label — Identifies engine model and type (located on the valve cover).
(H) Spark Plug — A device in the cylinder head of the engine that ignites the fuel mixture by means of an electric spark.
(J) Oil Filter — Filters engine oil to prolong generator life.
(K) Battery (installer supplied) — 12 Volt DC, lead acid, automotive style battery provides power to start the engine.
(L) Oil Drain Hose — Provided to facilitate oil changing.
(M) Generator Data Label — Identifies generator model number and serial number. Located inside battery access
compartment.
17kW and 20kW Generator (Back View)
Not for
Reproduction