Specification Sheet

12kW
¹
Standby Generator

Additional Information
* CARB does not regulate emergency standby generators outputting less than 50 HP. Only the EPA standards apply.
1
This generator is certified in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-14 (motors and generators).
Certifications
CARB Compliant*
FCC Part 15 Class B / CAN ICES - 003 (B)
cUL Listed to CSA 22.2 No. 100-14
UL 2200 Listed
EPA Certified Fuel System
Complies with NFPA 37 4.1.4.1.2
Available Accessories
Maintenance Kit 6035
Cold Weather Kit 6567
E-Stop Kit 6491
Power Management
Low Voltage Module
071052, 071053
Power Management
High Voltage Module
071051
Generator Status LED Kit 6535
Battery Warmer 6578
InfoHub Universal 6574
Operations
Engine Warm Up (sec) 20 seconds after all settable delays
Engine Cool Down (min) 5
Response Time (sec) Immediate after engine warm up
Weight and Dimensions
Assembled Weight (lbs / kg) 361 / 164
Overall Dimensions (in / mm) 28 x 26.1 x 37.2 / 711 x 663 x 945
Packaged Weight (lbs / kg) 423 / 192
Packaged Dimensions (in / mm) 39 x 33.5 x 45 / 991 x 851 x 1143
Enclosure Material
Galvanneal Steel with Corrosion
Resistant Paint
Available Transfer Switches
071100 100 Amp
071150 150 Amp
071200 200 Amp
071071 Symphony® II 100 Amp
071070 Symphony® II 150 Amp
071068 Symphony® II 200 Amp
071057 Symphony® II Dual 200 Amp
* CARB does not regulate emergency standby generators outputting less than 50 HP. Only the EPA standards apply.
1
This generator is certified in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies) and CSA (Canadian Standards Association) standard
C22.2 No. 100-14 (motors and generators).
37.2 in
(945 mm)
26.1 in (663 mm)
28 in (711 mm)
26.1 in (663 mm) 22.5 in (572 mm)