Dimensions Guide

17 & 20kW
¹
Standby Generator

Available Certifications
CARB Compliant*
cUL Listed to CSA 22.2 No. 100-14
UL 2200 Listed
EPA Certified Fuel System
Available Accessories
Maintenance Kit 6035
Cold Weather Kit 6578
E-Stop Kit 6360
Power Management
Low Voltage Module
6536
Power Management
High Voltage Module
6537
Generator Status LED Kit 6535
Uninterruptible Power Supply 6581
Dual Twisted Wire Spool (100 ft) 6541
Dual Twisted Wire Spool (200 ft) 6540
Dual Twisted Wire Spool (500 ft) 6539
Dual Twisted Wire Spool (1,000 ft) 6542
Additional Information
Other Features
Enclosure Material
Galvanneal Steel or Aluminum
with Corrosion Resistant Paint
Engine Warm Up (sec) 20 seconds after all settable delays
Engine Cool Down (min) 5
Response Time (sec) Immediate after engine warm up
50.5 in (1283 mm)
48.1 in (1222 mm)
33.8 in (859 mm)
29.6 in (752 mm)
30.6 in
(777 mm)
Weight and Dimensions
17kW
1
20kW
1
Assembled Weight
(lbs / kg)
471 / 214
Steel - 489 / 222
Aluminum - 440 / 200
Overall Dimensions
(in / mm)
50.5 x 33.8 x 30.6
1283 x 859 x 777
50.5 x 33.8 x 30.6
1283 x 859 x 777
Packaged Weight
(lbs / kg)
616 / 279
Steel - 634 / 288
Aluminum - 580 / 263
Packaged
Dimensions
(in / mm)
68.1 x 41 x 39.9 /
1730 x 1041 x 1013
68.1 x 41 x 39.9 /
1730 x 1041 x 1013
Available Transfer Switches
071100 100 Amp
071150 150 Amp
071200 200 Amp
071071 Symphony® II 100 Amp
071070 Symphony® II 150 Amp
071068 Symphony® II 200 Amp
071057 Symphony® II Dual 200 Amp
* CARB does not regulate emergency standby generators outputting less than 50 HP. Only the EPA standards apply.
 This generator is rated in accordance with UL (Underwriters Laboratories) 2200 (stationary engine generator assemblies)
and CSA (Canadian Standards Association) standard C22.2 No. 100-14 (motor and generators).