Use and Care Manual

Not for
Reproduction
32
Briggs & Stratton Power Products Group, LLC will repair or replace,
free of charge, any part(s) of the equipment that is defective in material
or workmanship or both. This warranty is effective for the time periods
and subject to the conditions stated below. For all warranty service,
find the nearest Authorized Service Dealer in our dealer locator map at
BRIGGSandSTRATTON.COM.
THERE IS NO OTHER EXPRESS WARRANTY. WARRANTY COVERAGE
FOR IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD SET FORTH BELOW, OR TO THE EXTENT PERMITTED
BY LAW. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARE
EXCLUDED TO THE EXTENT PERMITTED BY LAW.
Some states or countries do not allow limitations on how long an implied
warranty lasts, and some states or countries do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation
and/or the above exclusion may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from
state to state or country to country.*
* In Australia - Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. For warranty service,
find the nearest Authorized Service Dealer in our dealer locator map at
BRIGGSandSTRATTON.COM, or by calling 1300 274 447, or by emailing
or writing to [e-mail], Briggs & Stratton
Australia Pty Ltd, 1 Moorebank Avenue, NSW, Australia, 2170.
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
STANDBY GENERATOR OWNER WARRANTY POLICY
† Enclosure is warranted against surface rust and corrosion for the first
year of the warranty period. Surface rust and corrosion is defined as any
rust or corrosion that has penetrated the paint but has not penetrated
through the metal substructure.
Enclosure is warranted against rust-through for the first two years of the
warranty period. Rust-through is defined as rust or corrosion that has
penetrated completely through the paint and metal substructure.
† Accessory parts have a separate warranty. Refer to the warranty included
with the accessory part at purchase.
‡ Travel expenses are reimbursed as specified under the Briggs & Stratton
Warranty Guidelines document to authorized Briggs & Stratton dealers
for performing applicable warranty repair work.
The warranty period begins on the date of purchase by the first retail or
commercial customer. In order to ensure prompt and complete warranty
coverage, REGISTER YOUR PRODUCT IN ONE OF THREE WAYS:
1. ONLINE AT BRIGGSANDSTRATTON.COM, OR
2. MAIL THE COMPLETED REGISTRATION CARD, OR
3. CALL 888-575-8226
SAVE YOUR PROOF OF PURCHASE RECEIPT. IF YOU DO NOT PROVIDE
PROOF OF THE INITIAL PURCHASE DATE AT THE TIME WARRANTY
SERVICE IS REQUESTED, THE MANUFACTURING DATE OF THE PRODUCT
WILL BE USED TO DETERMINE THE WARRANTY PERIOD.
Registration is not required to obtain warranty service.
Warranty terms continue on next page.
WARRANTY PERIOD
International (Outside US and Canada)
PARTS 3 years or 1000 hours †
LABOR 3 years or 1000 hours †
TRAVEL 3 years or 1000 hours † ‡
United States and Canada
PARTS 4 years †
LABOR 4 years †
TRAVEL 4 years † ‡
COVERAGE*
LIMITED WARRANTY