Instruction manual

24
HD REFORMAT
HD FAT32
SD FILE
AUTO ERASE
SD REFORMAT
DISK SETTING
MAIN PAGE
: HD1
: BUILD
: JPEG
: OFF
: START
COMM ID: This function is disabled and not
supported on the current MDR-304A.
RS-232 ENABLE:
This function is disabled and not supported on
the current MDR-304A.
RS-232 CONNECTION: This function is disabled
and not supported on the current MDR-304A.
BAUD:
This entry selects the baud rate of the GPS
Antenna (RS232 port). This should be left at
4800.
GPS SPEED:
Select either Km/H (kilometers per hour) or MPH
(miles per hour).
G-SENSOR SENSITIVITY:
Increases or decreases the point where an alarm
activated recording is triggered by the G-sensor.
DISK Settings
HD REFORMAT:
Allows you to clear out all the data in the
hard-disk drive. You will be required to enter a
pre-set password before clearing out the data.
Enter the standard password “9999” if you
haven’t set your individual password.
HD 1: Clears out all the data stored in HD 1.
HD FAT32:
This function builds the FAT32 file system in the
hard disk, so files can be transferred to and stored
on a PC. HDD Viewer will be required to view these
files.
SD FILE:
This option determines the format in which to save
important image files in an SD card.
JPEG: Archives images in the JPEG format, to
save a single picture in every file.
AVI: Archives images in the AVI format, to save a
sequence of images in a file, the
maximum limit being 300 images for every
file. You can stop recording whenever you
want, and if you don’t, recording will
automatically stop at the maximum of 300
images.
AUTO ERASE:
There are two options.
OFF: Disables the "AUTO ERASE" function.
SET: Enables the "AUTO ERASE" function.
Select "SET" and press the ENTER button to
enter the "AUTO ERASE SETTING" page,
where you can enable the settings to save
data for storage for any period of time from 1
to 365 days. After the expiry of the time
period you set, the data will be erased
automatically.
SD REFORMAT:
Allows you to clear out all the data in the SD Card.
SYSTEM Settings
RECORD
ALARM
CLOCK/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO DISK PAGE
RECORD
ALARM
CLOCK/ TITLE
COMMUNICATION
DISK
SYSTEM
MAIN MENU
GOTO SYSTEM PAGE
SYSTEM
OPERATION LOG : ENTER
OSD LANGUAGE : ENGLISH
MENU BACKGND : 2
BUZZER : OFF
PASSWORD : SET
SETUP PWD : OFF
DEFAULT : LOAD
SD SETUP : SAVE
VERSION : ENTER
MEIN PAGE