Installation & Operating Guide

27
Graphic and Control Window displaying six detected objects for sensor 1 (CAN ID 0x310).
7.5.2 Backsense Detection Table
The Backsense Detection Table is a floating sub window of the Graphic and Control window
which displays numerical values for all detection data of up to 16 closest objects detected by
the selected sensor.
There is no user interaction available for the Backsense Detection Table. As with the detection
grid of the Graphic and Control, the sensor with lowest base ID value is selected by default.
An example from the Detection Table is shown below:
Backsense Detection Table displaying detection data for six objects from Sensor ID 0x320.
7.5.3 Backsense Network Summary Table
The Backsense Network Summary Table is a floating sub window of the graphic and control
window which displays X, Y co-ordinates for up to 16 detected objects of up to 8 connected
sensors as per the maximum capability of the system. There is no user interaction available
for the Backsense Network Summary Table. As with the detection grid of the Graphic and
Control, the sensor with lowest base ID value is selected by default. An example from the
Detection Table is shown below:
Backsense Network Summary Table displaying detection data
for six objects from Sensor ID 0x02
7.6 Backsense Configuration Tool
The Backsense Configuration Tool is a command line type application that enables the user to
perform the following functions within the BS-9100 system:
• Alter CAN ID of each sensor within the permitted range.
• View live CAN data from the entire network.