Installation & Operating Guide

The application can now be launched from the Start Menu under the heading Softing CAN.

7.4.2 Softing CAN Drivers and Software configuration

Once the setup has been completed, the Softing CAN Interface Manager should be launched.

Once the CAN interface has been connected to the PC, the Softing Interface Manager should

automatically detect and list it as a device. The following steps should then be performed to

configure the interface for use with the Brigade Backsense CAN Radar Test Tool.

Step 1 – Softing Interface manager shows an

interface has been connected, select the CAN

interface and select Edit

Step 2 – Select Layer 2 configuration

Step 3 – Leave all values as default and

confirm the configuration by selecting OK.

Step 4 – Select Finish to complete the

configuration

Once completed, the Backsense CAN Radar Test Tool can be installed, without this application

installed the Backsense CAN Radar Test Tool will suffer significant errors.