Specifications

60GHzand80GHzProductsNMSManual
34 58000511rev.F
SystemContact: Identificationofthecontactpersonforthismanagednode,together
withinformationonhowtocontactthisperson.
3. Next,enterthe‘IPaddress’,‘HostName’,andtrap‘Community’ofthemanagement
station(s)thatwillbemonitoringthisunit.AllSNMPalarms(traps)willbesenttothe
hostspecifiedinthissection.Amaximumofthreetrapdestinationscanbeconfigured.
IPAddress: TheIPaddressdestinationofthehosttoreceivetraps
HostName:Thehostnameassignedtothemanagementstationreceivingthetraps.
Community:ValuerequiredbySNMPmanagementstationtoauthenticateincoming
traps.
4. EnableorDisablethe‘AuthFailureTrap’.Whenenabledatrapwillbesenttothe
managementagentifaSNMPreadorread/writeaccesstotheunitisattemptedusingan
invalidcommunitystring.
5. Selectthe‘Passwords’pagefromthewebinterfaceoftheunit.
6. Underthe‘Communities’sectionenterinthe‘ReadOnly’and‘ReadWrite’community
stringsand‘SNMPAccess’capabilities.RefertoSection 7.4foradetaileddescriptionof
theseparameters.