Installation manual

TM
Network Management Manual
580-00511, rev B 12 of 34
3.1 Unit
Model/Serial: The model and serial number identify the unit and are required for any
interaction with BridgeWave customer support.
Transmit Radio Band: Indicates the frequency band of the radio’s transmitter. A
link consists of one low-band and one high-band radio.
Up time: Time since last unit restart or power cycle
Input Voltage: Voltage present at unit power input connector
o Green: >= 16 volts
o Red: < 16 volts
Temperature: Temperature within unit enclosure
o Green: within specification (-20C to 75C) (-4F to 167F)
o Yellow: at operating limit
3.2 Radio
Link up: Speed and state of radio interface
o Green: link is up, error-free
o Yellow: link is up, but not error-free
o Red: link is down
Receive signal level: Signal level in dBm and voltage present at unit test point
For 1000Mbps link speed:
o Green: >= -51dBm
o Yellow: between -51 and -54dBm
o Red: < -54dBm
For 100Mbps link speed:
o Green: >= –61dBm
o Yellow: between -61 and -64dBm
o Red: < -64dBm