Installation manual

TM
Network Management Manual
580-00511, rev B 10 of 34
3. Status Web Page
After logging on, the Status screen will be displayed. The navigation bar across the
top of the screen provides links to the various management functions:
• Status – display identification information and status of the unit and the
unit’s interfaces
• Setup – configure the management agent and physical network interfaces
• Passwords – set/change passwords and enable/disable factory access to the
unit.
o Default username/passwords are:
 User: user/userpass
 Administrator: admin/adminpass
• Statistics – display Ethernet traffic statistics for physical port interfaces
• Maintenance – perform an auto-calibration, soft restart or update software
• Logout – terminate the management session from this browser window
The Status page shows basic unit information including model and serial numbers, as
well as the current state of the unit and its physical interfaces. Green, yellow and red
status indicators provide a quick visual summary of the unit’s operating condition.
Under normal operating conditions, all indicators should be green, unless one of the
network interface ports is not in use. Red indicators signify unit failures, unconnected
network interfaces, or abnormal operating conditions. Yellow indicators signify
marginal operating conditions, which may impact unit operation. The displayed
information is updated with every refresh of the Status page and does not
automatically update.