Datasheet

AR/GE/FE/U80/80XInstallationManual

21 58000519rev.D

3.8.3 InstallationInstructions

1. Removetheprotectivelinerfromtheplasticcanopy

2. Use ascrewdriveror5/16”nutdrivertosetthehoseclamptotheendo fitsrangefor

maximumopening

3. Slipthehoseclampovertheradomesothatitlooselysitsinapproximatelythemiddleofthe

radome.

4. Slideoneendoftheplasticcanopyundertheclampandslowlybenditaroundthecanopy

andworkitundertherestoftheclamp.

5. Alignthecanopytot hebackedgeoftheradomeandpositiontheclamp1to3”awayfrom

theedge

6. Tightentheclampuntilsnug.( DoNotOvertighten)

Removecanopywhenit’s notsnowingtoreduceantennawind