B-TAG Bridgestone Intelligent Tag MODEL B812 User’s Manual
System organization About B-TAG The B-TAG (Bridgestone Intelligent TAG system (below, it calls “the system” or “this system”), with the sensor which is installed inside the tire, measures the tire pressure and temperature. － The organization and the function － This system consists of the sensor, the receiver the ECU, the indicator, the hand-held reader and the tag reader, uses with the kind of configuration which is shown in the figure.
This system has the following function. ・The tire pressure and temperature, indicating warning for them and the system state in the Hand-held reader. The wireless is communicated with ECU set up in the vehicle with the Hand-held reader, worth of one vehicle the tire pressure and temperature are read to, and it is possible to display it. ・The warning, the error code, the tire pressure and temperature indicating in the indicator.
Notices for using in UAS / Canada This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
