User Manual

Chapter 6: Additional Bridgemate functions 51
• In case firmware transmission has been interrupted, the Bridgemate will remain in firmware
update mode until the firmware is again broadcasted and received fully by the Bridgemate.
• The transmission progress bars in BCS and on the Bridgemate do not necessarily progress
equally.
• When the progress bar on the Bridgemates reaches 100%, it will usually take a few more
seconds to complete as it waits for parts of the firmware to be resent. This is normal
behaviour.
• The firmware update mode in Bridgemate can be activated at any time. Bridgemates will
automatically start receiving the firmware, even when the transmission has started earlier.
Bridgemates do not have to be in the firmware update mode before firmware transmission is
started.