Owner's Manual

Getting Started
You should have received an email containing your default login information;
this will be used to configure your device and view tracking information (which
will be covered later in this user’s guide).
The first step in using your Spark Nano 7 is to charge it. Plug the (included)
AC adapter into a wall outlet. Then, gently insert the mini-USB charging end
into the charging port of your device. Ensure the mini-USB ends are properly
aligned.
Charge your device for at least 5 hours prior to first use. When fully charged,
the red light will turn solid (and then will stop glowing after a prolonged period of
remaining plugged in after it’s fully charged). When the device is done charging,
disconnect the cable and press the power button to turn the device on. Make
sure all the rubber port covers are securely in place before use.
It is important that the tracker has a clear view of the sky. Since the device is
motion-activated, it is not sufficient to leave it outside or on a window sill for it to
register. It must be moving in order to register and report its first location.