Owner's Manual

Monitoring Tab
______________
This is the main interface of the platform and includes the work area (shown
below) as well as the map on the right side. From here, you can click on a unit
icon to expand it and see additional information, center over a specific unit, see
whether it's moving or stationary, run a quick track or report, as well as execute a
command if it's available for your device.
(1) Center over a specific unit
(2) See a unit's current motion state
(3) Run a track for the current day
(4) Run a Trips & Stops report
(5) Ping your device (if available)
(6) Change unit properties