User's Manual

Page 4BrickHouse Security User’s Guide Page 5 BrickHouse Security User’s Guide
Getting Started
The rst step to getting your Clothes Hook Video Recorder to work is to charge it. The device can be charged by
connecting it using the included USB cord to your computer or an AC outlet using the included adapter. The LED
will blink green while the device is charging and glow solidly when the battery is full. Before using the device for
the rst time, it is suggested that you charge the video recorder for about 5 hours.
Before inserting a micro SD card, make sure the card is formatted correctly. The device can record in the FAT
16/32 format. If you aren’t sure how to format an SD card, you can nd instructions here: http://www.ehow.com/
how_2112408_format-memory-card.html. The Clothes Hook Video Recorder is compatible with micro SD cards
up to 16GB capacity. Once it has been formatted, insert the micro SD card in the memory card slot on the device
with the gold contacts facing inward. When secure, you will feel the card “click” into place. To remove the card
later, simply push on it and it will spring out.
To power the device on, move the power switch to the ON position. With the switch set to ON, hold down the
Video button for 3 seconds and release it. The LED will blink 5 times and then glow solid to indicate it is in Standby
mode. To power the device off, hold down the Video button for 2 seconds. The LED will blink 3 times quickly, and
then go out.
If the device remains in Standby for longer than 5 minutes, it will automatically power off.