Manual

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
• Connect an Ethernet cable from the WOB-100Ap to the OUT port on the
high-power PoE injector.
• Connect an Ethernet cable from the IN port on the high-power PoE
injector to the LAN Ethernet port on the DWRT-600N.
• Connect an Ethernet cable from the LAN Ethernet port on the DWRT-600N
to your PC.
Connect the Ethernet cable from your PC
and the high-power PoE injector to any of
the DWRT-600N’s four LAN Ethernet ports.
POWER OUT
Connect the Ethernet
cable from the OUT
port to the WOB-100Ap
IN Port
Connect the Ethernet
cable from the IN
port to the DWRT-
600N LAN Ethernet
plug.
Connect PC & WOB-100Ap to DWRT-600N