Manual

Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
• Once connected to the WOB-100Ap’s web UI, select Configuration from the
right hand corner and Wireless from the left hand side menu.
• Select the Site survey button to scan for available networks.
• From the list of available networks, press the Select button of the SSID of the
DWRT-600N.
• Click Apply to save the settings.
• When asked to unplug the network cable, disconnect the Ethernet cable
connecting the WOB-100Ap to the DWRT-600N.
• After approximately one minute, the wireless connection will be established.
Set Up Wi-Fi Connection