User`s manual

11
B. Power over Ethernet (PoE) Connection
The VS-01A is PoE compliant, so there are two options for connecting the
video server and CCTV camera to a power and Ethernet source. The
video server can either be connected to a PoE-enabled switch or a
non-PoE switch.
a. If using a PoE-enabled switch:
i. Connect the CCTV camera to the Video input connector of the video
server using a BNC Connector.
ii. Use a single Ethernet cable to connect the camera to the
PoE-enabled switch. The Ethernet cable should meet the specs of
UTP Category 5 and not exceed 100 meters in length.