User`s manual

10
Chapter 5 - Installation
5.1 Video Server Connection
A. Basic Connection (Without PoE)
a. Connect the CCTV camera to the video input connector of the video
server using a BNC Connector.
b. Connect the supplied power cable to the video server and plug it into a
power outlet.
c. Connect the video server to a switch using an Ethernet cable. The
Ethernet cable should meet the specs of UTP Category 5 and not
exceed 100 meters in length.
d. To attach external devices, such as sensors and alarms, connect them
to the extension I/O terminal block.