User`s manual

g. For ceiling installation:

Mount the camera device on the desired location. Use the screwdriver

from the product package to tighten the four included screws clockwise

through the four holes on each side of the device as shown below. The

best place to mount the camera is into a ceiling stud.

WARNING: Do not mount the camera on a soft material. The camera may

fall and be damaged.POE, Power, DIDO, Audio Connection:

h. Adjust the Lens Focus Range and Zoom Viewing

(This function is only for VD-100A series/VD-300A)

1) Adjust the lens angle

i. The lens can be rotated to the left or right.

ii. Release the tilt screw on both side of the device to rotate the lens up

or down. After completion, tighten the tilt screw.