Installation Guide

- 7 -
Viewing Video Streams with Internet Explorer
Step 1. Check the Video Stream Settings
On the camera's web UI, please go to Configuration → Camera/Video/Audio → Video,
and you will find the stream 1, stream 2, and stream 3 settings. Please make sure the
video stream corresponding to the connected lens module is enabled. (Stream 1
corresponds to the lens module connected to lens port 1, and so on.)
Step 2. Select the Video Stream for Live View
After finishing the video stream settings, please go to “Live View” and select the stream
you want to view from Channels (Stream1 / Stream2 / Stream3).