User`s manual

- 31 -
c. If the connection was successful, the user will see the message:
“Congratulations. The installation of the camera is complete.”
When this window is displayed, click <PC-NVR> to start the PC-NVR program, <Live
View> to view the live video from the connected IP camera, or <X> in the top right corner
of the screen to close the installation window. If the user starts the PC-NVR program,
please refer to the PC-NVR user manual.
Once installation is complete, the Administrator should proceed to the next section
"Accessing the Network Camera" for necessary changes and configurations.