User`s manual

- 20 -

EasyLink

is a unique Brickcom function which allows users to assign a unique EasyLink

name to their network camera’s IP address. There is no need to configure the router to open

up ports or remember hard-to-memorize IP addresses. When this feature is enabled, users

can log onto [uniqueEasyLinkname].mybrickcom.com to view the camera’s web GUI and live

view.

 Enter a unique EasyLink name whose length must be between 5-32 characters.

 When finished, click the arrow button to continue.

7. When the IP address settings have been configured, the screen will either display a

successful or failed connection message. If the connection failed, either try again or

quit the installation.

a. If “DHCP IP address settings” was selected, the failure page will be displayed as

below: