User`s manual

C. For ceiling installation:

The user needs the two screws which are included in the product package

and a screwdriver. Mount the camera on the desired location and use the

screwdriver to tighten the screws clockwise through the two holes on each

side of the device as shown below. The best place to mount the camera

is into a ceiling stud.

Place the dome cover back on the camera device.

WARNING: Do not mount the camera on a soft material. The

camera may fall and be damaged.

D. Adjust the Lens Focus Range and Zoom Viewing.

(This function is only apply for FD-300A)

a. How to adjust the lens angle

i. Release the pan screw and then rotate the lens to left or right. After

completion, tighten the pan screw.