User`s manual

- 61 -
Video Clip/Snapshot
Video Clip
If there is an event happened, the camera can be configured to record the video as a reaction.
Pre-alarm buffer - Images can be stored internally from the time immediately preceding the
trigger. Enter the desired length of time.
Post-alarm buffer - Images can be stored internally from the time immediately following the
trigger. Enter the desired length of time.
Maximum buffer size – To specify the Max. file size of each video clip. If the file size is more
than it, then the camera shall stop the recording.
Click Apply to apply settings or Cancel to cancel changes.
Snapshot
This function is used to determine when snapshot images will be stored before or after an event
is triggered.
Pre-alarm buffer - Images will be stored internally from the time immediately preceding the
trigger. Enter a number to decide how many images to capture before a trigger is activated. Up
to 7 images can be generated.
Post-alarm buffer - Contains images from the time immediately after the trigger. Up to 7
images can be generated.