User`s manual

- 54 -
On Screen Display
Cordon Enable: To control if the cordon is shown inside the image as the part of the video.
Moving Object Enable: To control if the highlight of the moving object is shown inside the
image as the part of the video.
Trajectory Enable: To control if the trajectory is shown inside the image as the part of the
video.
Counting Enable: While an invader cross over the line, then the camera counts it automatically.
So enable this one to let the count numbers be shown as the part of the video.
People Counting Parameter
Human Detection Enable: To enable/disable the function of the human detection (mainly focus
on the circle object)
Min Head Circumference: The minimum value of Head Circumference.
Max Head Circumference: The maximum value of Head Circumference.
Sensitivity: Adjust the sensitivity for the detection. The sensitivity is higher; it is easier to be
triggered.
Tolerance: The tolerance for the detection of the circular object.
Left/Miss Object Parameter
Draw Abandon Object: To control if the highlight of left/missing object is shown inside the
image as the part of the video. There will be a border outside the left/missing object.
Abandon Start: If there is no movement, then the system starts to check if the object be moved.
Such as an example: If the chosen stream is configured as 15 fps, and this parameter is 150,
then the system will alarm, if the object is lost over 10 seconds.