User`s manual

NOTE - a higher bitrate will use higher network bandwidth. The video quality can

be set between Level 1 to Level 6, with Level 6 producing the best image quality.

HTTP Transport – If MJPEG is used for Video Codec, users can enable HTTP

Transport protocol for video communication.

NOTE – HTTP Transport is for non-IE browser used only.

Click Apply to apply settings or Cancel to cancel changes.

NOTE - For best recording experience, configure the Network Camera to one of

the following frame rates based on the Flicker-Free setting:

Flicker-Free Frame Rate

------------------------------------ ----------------------------------

Outdoor 25, 10, 7, 5, 3, 2

Indoor (50/60 Hz ) 25, 20, 10, 7, 5, 3, 2