User`s manual

6. If the camera supports the EasyLink

function, the following page will be

displayed. Otherwise, this page will not be shown. *If desired, click <Skip>

to skip this setting.

EasyLink

is a unique Brickcom function which allows users to assign a unique domain

name to their network camera’s IP address. There is no need to configure the router to

open up ports or remember hard-to-memorize IP addresses. When this feature is

enabled, users can log onto [uniquedomainname].mybrickcom.com to view the camera’s

web GUI and live view.

 Check the option box to enable EasyLink

. Enter a domain name whose length must

be between 5-32 characters.

 For Refresh Time, select a desired amount of time from the drop-down menu to

confirm the connection status.

 When finished, click the arrow button to continue.

NOTE: See page 47 for more details about the EasyLink function.