User`s manual

- 75 -
Configuration
This feature allows the user to export/import the configuration files of the network camera.
Import/Export - Click export to pop up a dialog to indicate the location and file to export.
Click browse to indicate the location and file of the camera configuration and click import
to import the configuration file back into the network camera.
Reset to Default
This section is used to restore the camera to default factory settings. Check the boxes to
preserve the IP, Wireless, Date and Time, EasyLink or Language settings. Click Apply to
restore the camera to default factory settings.
Reboot
This feature will reboot the camera. Click Apply to begin. A message will pop up asking “The