User`s manual

- 30 -

EasyLink

is a unique Brickcom function which allows users to assign a unique name to the

network camera. There is no need to configure the router to open up ports or remember

hard-to-memorize IP address. When this function is enabled, users can use

[uniqueEasyLinkname].mybrickcom.com to access the camera’s web GUI and live view.

1. Check the box to enable EasyLink

2. If Auto mode is selected, the following page will be displayed.

NOTE - This mode is recommended.

3. Enter a unique EasyLink name whose length must be between 5-32 characters. Click

the button of “Verify” to check that the EasyLink name can be used or not.