Operation and Safety Manual Model Rofry ® Heavy Duty; Semi-Auto Oven
Error! Style not defined. 3 1 Contents 1 2 3 4 5 6 Contents...................................................................................................................................... 3 Important References ................................................................................................................. 4 2.1 Fundamental Safety Notes................................................................................................... 4 2.2 Warranty and Liabilities .............
Error! Style not defined. 4 2 Important References 2.1 Fundamental Safety Notes 2.1.1 Consider notes in the operating manual Precondition for the safe and trouble free use of this unit is the knowledge of the fundamental safety notes and safety regulations. The operating instruction contains the most important references to operate the unit safely. These operating instructions, particularly the safety references, are to be considered by all persons, who work on the unit.
Error! Style not defined. 5 2.2 Warranty and Liabilities Fundamentally our "General terms of sale and delivery" count. These are known to the operator at the latest since signing of the contract. Claims to warranty and liability at persons- and property damages are impossible, if they are to be led back to one or several of the following causes: • • • • • • • • Non due use of the unit. Improper assembling, starting up, operating and servicing of the unit.
6 Error! Style not defined. 2.5 Special Safety References 2.5.1 Safety devices • Before operating the unit all protective devices like door and exhaust-cover as well as all removable parts must be installed correctly and be fully workable. • Protective devices may only be removed: • After stand still and • Prevention of unintentional restart. • If partial components are delivered, an authorized staff member or service technician has to execute assembly according to installation guidelines. 2.5.
Error! Style not defined. • • • • • 7 Prescribed adjustment, service and inspection work is to be accomplished timely by the manager or if necessary by an authorized service technician. The operating personnel is to be informed before the beginning of the maintenance and service work. The unit is to be disconnected from the mains before maintaining, inspecting and repairing is performed; the main switch is to be guarded against unintended pushing. Check all screw connections for tight fitting.
Error! Style not defined. 8 3 Introduction 3.1 Introduction RoFry® offers due to its unique technology the possibility to fry regular products completely without oil. The quality of the products fried without oil will always be the same high standard, no matter if you take deep frozen or fresh goods, French fries or chicken nuggets, Asian specialties or fast food products from USA. The intelligent sensor avoids wrong handling and levels out different amounts and temperatures. 3.
Error! Style not defined. 9 Loaded Standard Version): Loaded Canister-Version): Loaded with WaterConnection): RF-360-ST (Left Hand Loaded Standard Version): RF-360-TV (Left Hand Loaded Canister-Version): •RF-360-FC (Left Hand Loaded with Water-Connection): printed: 05/2013 Subject to change! RoFryUserManual.
Error! Style not defined. 10 3.3.3 Weight (Net weight) Front Loaded Version RF-300ST TV FC Standard-Version app. 78kg Canister -Version app. 88,5kg Water-Connected Version app. 88,5kg Right Hand Loaded Version RF-330ST TV FC Standard-Version app. 78kg Canister-Version app. 88,5kg Water-Connected Version app. 88,5kg Left Hand Loaded Version RF-360ST TV FC Standard-Version app. 78 kg Canister -Version app. 88,5kg Water-Connected Version app. 88,5kg 3.3.
Error! Style not defined. 11 4 Installation and putting into operation In general all RoFry® units will be packed for safe transport after the final control in order to reach you properly. Nevertheless we ask you to have a look at the machine on arrival to detect any transport damages. Note! Visible damages have to be reported immediately! 4.1 Unwrapping • • • • Open the box and remove the wrapping carefully. Take out all movable parts and make sure that they are complete.
12 Error! Style not defined. Note! In general all Installation and Service work has to be done by an authorized service technician! The following regulations have to be observed: DIN EN 1717 (alt DIN 1988, Part4, technical regulations for drinking water installation/TRW. • RoFry® requires a cold water connection; we recommend using a water-softening unit in case of hard water above 8° dH (= Level 1). • Use flexible pressure hose ½“ with ¾“ screw joint.
Error! Style not defined. 13 5 Operation 5.1 How RoFry® works Once the device has been turned on, RoFry initializes. After pushing the STANDBY key is pushed, RoFry enters the cold standby level. After confirming a program selection with the START key, RoFry enters the hot standby level and is preheating to set temperature. This takes app. 2 minutes. To fry food products, pull out the basket, put in the food to be prepared, push in the basket and push the START key.
Error! Style not defined. 14 5.2 Control Panel Following you will find an explanation a location of all components and their function to for optimum use of RoFry®. STANDBY PROGRAMMING CLEANING TEMPERATURE Temperature display BASKET ROTATION TIME Time display REFERENCE Clear type display STOP START Indicator LEDs ENCODER knob printed: 05/2013 Subject to change! RoFryUserManual.
Error! Style not defined. 15 5.2.1 Function status of keys To simplify operation of the RoFry, the function keys change colors to show their status. Key LED off: Key cannot be selected (function is not available). Key LED green: Key can be selected (function is available). Key LED red: Key is selected (function is selected and active). Indicator LEDs red spinning over green: A cooking program is running with basket rotation Indicator LEDs flashing green: A cooking program is finished 5.2.
16 Error! Style not defined. 5.3 Description of operating elements Following you will find the description of switches, keys, knob and displays 5.3.1 Basket handle Pull out / push in the basket using the basket handle. 5.3.2 Door handle NOTE: Only open the door using the door handle after the basket has been removed completely from the equipment! Never use the door handle to carry the RoFry®! 5.3.3 Main switch By pushing the main switch the device is being turned on or off. 5.3.
Error! Style not defined. 17 5.3.9 BASKET ROTATION By pushing the ROTATION key the basket can be turned again after the regular emptying if necessary. 5.3.10 TIME By pushing the TIME key the set time of the current phase is displayed on the Time display. The set time appears as long as the TIME key is pushed. 5.3.11 Time display Display of remaining time, set time and reference time. 5.3.
Error! Style not defined. 18 5.4 Operation 5.4.1 Activate equipment INITIALIZING Press main switch 02:CHICK.NUGG. CONFIRM Press STAND-BY key (as soon as it lights up green) 5.4.2 Select program Select desired program by ENCODER 01:CHIPS CONFIRM Confirm selected program by START key 01:CHIPS PREHEAT Equipment heats up approx. 2-3 min. 01:CHIPS STAND BY Afterwards pull out the basket to the end stop 01:CHIPS STAND BY 5.4.
Error! Style not defined. 19 5.5 Programming 5.5.1 Activate equipment INITIALIZING Press main switch 02:CHICK.NUGG. CONFIRM Press STAND-BY key (as soon as it lights up green) 5.5.2 Enter programming level Push and hold programming button (at least 3 seconds) CODE: 127 CONFIRM Select code “100“ by ENCODER (100 is the factory default and could have been changed!) CODE: 100 CONFIRM Confirm selected code by START key PROGRAM ROFRY CONFIRM 5.5.
Error! Style not defined. 20 Activate AUTOSTART by selecting(“Y“) or deactivate (“N“) Confirm by START key 08: FRIES AUTOEMPTY Activate AUTOEMPTY by selecting(“Y“) or deactivate (“N“) Confirm by START key 08: FRIES BASKET ROT. Activate Basket Rotation (“Y“) or deactivate by selecting (“N“) Confirm by START key 08: FRIES ROT. DELAY Adjust Rotation Delay shown in the Time display Confirm by START key 08: FRIES ROT.
Error! Style not defined. 21 6 Maintenance Following some advises concerning maintenance, care, trouble shooting and service for RoFry®. 6.1 Cleaning and Care 6.1.1 Safety advices • Do not use inflammable detergents cleaners. Never use high-pressure-, water pressure- or steam jet- cleaning devices. • Wear fire-safe, insulated gloves to prevent burnings when touching hot parts. • Wear acid-proof gloves while cleaning the cold parts to prevent skin irritations. 6.1.
Error! Style not defined. 22 6.1.4 RoFry®-spray ‘KOTE’ (ST-Version) KOTE creates a film that prevents that sediments of food will bake on the surface of parts. The film sticks to the parts during the cooking and so there will be no dirt on these parts. KOTE is tested and licensed for food equipment. KOTE is not to use with parts which have direct food contact. (e.g.: basket or basketholder). Using advices: • Parts to be sprayed are: chamber walls (incl.
Error! Style not defined.
Error! Style not defined. 24 6.3 Weekly Cleaning Beside the Daily cleaning the following items need some special care on a weekly basis: 01:CHIPS Leave current frying-program by STOP key CONFIRM Enter cleaning mode by CLEANING key 01:CLEAN SHORT START? Select the OPEN DOOR program by ENCODER :OPEN DOOR START? Confirm selected program by START key OPEN DOOR COOL DOWN RoFry® cools down for approx. 15-20 min.
Error! Style not defined. 25 6.4 Trouble-Shooting If your RoFry® does not work satisfactorily we would like to give a first help with the following checklist. Only after checking these points you should contact: a) Your responsible service partner or b) Directly the company: UBERT GASTROTECHNIK GmbH Werk II Gewerbegebiet Nord Vennekenweg 17 46348 Raesfeld Tel.:(49) 02865 / 602-226 Service-Tel.
Error! Style not defined. 26 6.5 Wiring Diagram 6.5.1 RF-300/330/360-ST/TV/FC 400V / 50-60Hz / 3Ph with N printed: 05/2013 Subject to change! RoFryUserManual.
Error! Style not defined. 6.5.2 RF-300/330/360-ST/TV/FC 27 208V / 50-60Hz / 3Ph without N printed: 05/2013 Subject to change! RoFryUserManual.
28 Error! Style not defined. 6.6 Replacement of gaskets: 1. Select the program „OPEN DOOR“, while in Cleaning mode. The unit cools down below 50°C; remove the basket and then open the door. Switch off the RoFry® at the main switch. OPEN DOOR START? 2. Remove the old gasket by pulling it out and clean the notch of the seal; remove grease and other residues. 3. Assemble in the new seal. Start with the 4 corners. 4. Push the seal into the notch.
Error! Style not defined. 29 6. Insert lamella sheet and basketholder again. Close the door. Remove the old basket gasket by pulling it out. 7. Clean the notch of the seal; remove grease and other residues. printed: 05/2013 Subject to change! RoFryUserManual.
30 Error! Style not defined. 8. Put in the new seal. Place the splice of the seal in the middle of the upper notch. 9. Push the seal into the notch. Make sure neither to stretch nor to forge the seal. 10. Finally check proper placement of the seal in the notch! printed: 05/2013 Subject to change! RoFryUserManual.
Error! Style not defined. 31 6.7 Spare Parts Defect parts are to be replaced only by original spare parts of UBERT GASTROTECHNIK GMBH; the replacement is to be carried out only by their service personnel or by your authorized Service companies. If you do not observe this note or in case of manipulation of a third party any claims for guarantee will become invalid! 6.7.
Error! Style not defined. 32 d=1,0*11*35 mm RoFry 333112 4 Kabel Tülle 46*32 RoFry Cable grommet 46*32 333302 4 terminal block, ceramic 333305 14 Kabel, Porzellanklemme, 2,5mm2, 2-polig, mit Loch Wago, Klemmblock, 10qmm Wago 333306 2 Wago Endwinkel für TS35 333307 5 Wago Brücken Sideblock (field-/main terminal block) Bridge for terminal block 333308 5 Wago Abschottung Separator for terminal block 335092 1 Sicherungsklemme Fuse holder 5x20 335095 1 Feinsicherung 5x20 - 0.
Error! Style not defined.
Error! Style not defined. 34 490041 490052 1 1 490054 RF5003 RF5004 RF8212 1 1 1 1 Endstück für Schlauch 21mm Form-Schlauch 35*4,5 (Innen Ø * Wandung) Schlauch Silikon transparent Korbhalter kompl. für RoFry Korb kompl RoFry RoFry Dosierflasche 1Liter (ohne Inhalt) für Entkalker M End fitting for hose Tube 90° angled Silicon tube transparent Basketholder assy RoFry Basket assy RoFry RoFry Lime Remover M dose-bottle 1liter (empty) 6.7.
Error! Style not defined. 35 RF-300 RF-330 RF-360 117397 Rückwand RF-300 Rear cover RF-300 117433 Rückwand RF-360 / RF330 Rear cover RF-360 / RF330 117433 Rückwand RF-360 / RF330 Rear cover RF-360 / RF330 117432 Seitenblende RF-330 Side cover RF-330 117443 RoFryUserManual.
Error! Style not defined. 36 6.8 Accessories The following accessories are available on request: • Spare basketholder, complete Part. No.: RF 5003 • Spare basket, complete Part. No.: RF 5004 • RoFry®-cleaner 25kg-Container Part. No.: RF 8200 • RoFry®-lime remover 5l-Canister Part. No.: RF 8210 • Refill basket Part. No.: RF 5010 • Scoop Part. No.: RF 5011 • French-fries-portioner Part. No.: RF 5012 • French-fries-bag rest Part. No.: RF 5013 • Store shelf Part. No.
Copyright Information Copyright © 2013 Brice Australia Pty. Ltd. This document may not be reproduced, in whole or in part, by any means without the prior express written permission of the copyright owner. Brice and the BRICE logotype are trademarks of Brice Australia Pty. Ltd.
