SDS
Coffee filters and Baking cups
Safety Data Sheet
According To Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules And Regulations
EN (English US)
3/5
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1. Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer, supplier,
importer, or the appropriate advisory agency including: ACGIH (TLV), AIHA (WEEL), NIOSH (REL), OSHA (PEL), Canadian provincial
governments, or the Mexican government.
8.2. Exposure Controls
Appropriate Engineering Controls: Ensure all national/local regulations are observed.
Personal Protective Equipment: Not required for normal conditions of use.
Materials for Protective Clothing: Not available
Hand Protection: None required under normal product handling conditions.
Eye Protection: None required under normal product handling conditions.
Skin and Body Protection: Not required for normal conditions of use.
Respiratory Protection: None required under normal product handling conditions.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on Basic Physical and Chemical Properties
Physical State
:
Solid
Appearance
:
White or dyed wax treated paper baking cup or coffee filter
Odor
:
Odorless
Odor Threshold
:
Not available
pH
:
Not available
Evaporation Rate
:
Not available
Melting Point
:
Not available
Freezing Point
:
Not available
Boiling Point
:
Not available
Flash Point
:
Not available
Auto-ignition Temperature
:
Not available
Decomposition Temperature
:
Not available
Flammability (solid, gas)
:
Not combustible but will burn if heated.
Lower Flammable Limit
:
Not available
Upper Flammable Limit
:
Not available
Vapor Pressure
:
Not available
Relative Vapor Density at 20 °C
:
Not available
Relative Density
:
Not available
Specific Gravity
:
Not available
Solubility
:
Not available
Partition Coefficient: N-Octanol/Water
:
Not available
Viscosity
:
Not available
Explosion Data – Sensitivity to Mechanical Impact
:
Not expected to present an explosion hazard due to mechanical impact.
Explosion Data – Sensitivity to Static Discharge
:
Not expected to present an explosion hazard due to static discharge.