Installation Guide

BE-110 SPECIFICATIONS: (SpecsfortheBE-104areonpage5)

Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall

COFFEE SYSTEM. For best results, it is advised that you hire a qualiﬁed professional.

1. Overall Dimensions(FinishedUnitwithRough-in-Box)approximately121/4”X133/8”(seebelow).

2. Dimensions for Rough-in-Box(MountingStructure)approximately11.5”X11.5”.

3. Electrical Requirements120VAC,60HZ.(1400watts).

4. Water Requirements1/4”ODwatersupplyline(copperorpoly)minimum30psitoamaximumof

 90psi.PotableCOLDwaterisrequired.

NOTE:Ifwaterisnotavailable,analternatewaterdispenserjug(5gallons)canbeusedwiththe

 optionalpumpaccessory(notsupplied).ContactBrewExpressformoreinformation.

Please Note: A ﬁlter is reqired for all hard water sources and recommended for regular standard soft water.

A shut off valve at water source is recommended. The ﬁlter, such as an ice maker type ﬁlter, can easily be

installed at the source. If water lines are not purged or clear of debris or a ﬁlter is NOT installed, foreign

particles (debris) in water may clog brewer system causing failure, and will void all warranties.

SPECIFICATIONS AND REQUIREMENTS