Installation Guide

9 7/8" 249.8mm
11 3/4"
299.6mm
2 1/2" 63.5 mm
1" 24.3mm
9 7/8"
251.7mm
5 1/8" 130.8mm
8 3/8" 213.5 mm
3 7/8" 99.0 mm
3/4" 18.3 mm
8 1/2" 216.70 mm
10 1/8"
254.90 mm
AREA ON WALL
TO BE CUT
(USE TEMPLATE)
BE-104 SPECIFICATIONS: (SpecsfortheBE-110areonpage6)
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
1. Overall Dimensions(FinishedUnitwithRough-in-Box)approximately9.9”x11.8”(seebelow).
2. Dimensions for Rough-in-Box(MountingStructure)approximately8.5”x10.1”x4”.
3. Electrical Requirements120VAC,60HZ.(1400watts).
4. Water Requirements1/4”ODwatersupplyline(copperorpoly)minimum30psitoamaximumof90psi.
 PotableCOLDwaterisrequired.
NOTE: Ifwaterisnotavailable,analternatewaterdispenserjug(5gallons)canbeusedwiththe
 optionalpumpaccessory(notsupplied).ContactBrewExpressformoreinformation.
 Please Note: A filter is reqired for all hard water sources and recommended for regular standard soft water.
A shut off valve at water source is recommended. The filter, such as an ice maker type filter, can easily be
installed at the source. If water lines are not purged or clear of debris or a filter is NOT installed, foreign
particles (debris) in water may clog brewer system causing failure, and will void all warranties.
SPECIFICATIONS AND REQUIREMENTS
5