Installation Guide

MOUNTING
SCREWS
14
BREWER INSTALLATION
3" max
Power Panel
8. The male quick connector has a built in valve so water can be
turned on prior to connection to coffee maker. Place unit on
a towel or cardboard to protect counter surface. Place
BREW EXPRESS directly in front of rough-in box. Connect
brewer to water supply using quick connectors. (See Quick
Connect Detail).Snapconnectorstogetherrmly.Turnon
water, check for leakspriortonalinstallationof
BREW EXPRESS. If leaking, turn off water, tighten connections
or reinstall quick connector. Turn water on and check again.
See Figure 8.
Quick Connect Detail
Figure 8
9. GentlyslidetheBREW EXPRESS into the rough-in-box.
 Becarefulnottodamagewatersupplylines.Armpushwill
connect power from rough-in-box to the BREW EXPRESS.
Use two mounting screws to secure BREW EXPRESS
to rough-in-box. Note, the lock bracket and longer screw go
in the upper position (on some models the two screws will
 bethesamelength).
WARNING:
Do not caulk or grout to brewer.