Instructions for use

8
using your kettle
Ifthiskettleislledabovethemaximumlevelmark,hotwatermaybeejected
from the spout during boiling. Beware of steam coming from the spout or lid
especiallyduringrelling.Neveropenthelidwhenthekettleisboiling.TheFilter
andlterfunnelmustbettedtothekettleinorderforittooperatecorrectly.
1. With the kettle switched off, plug the power base into a suitable power outlet.
2. Remove the kettle from the power base before lling it with water. Do not ll the kettle
through the spout.
3. Open the lid and ll the kettle with water. Don’t overll the kettle and always
ensure that there is sufcient water in the kettle for it to operate correctly. This is
approximately 250ml or 1 teacup full. Always check the water level when the kettle
is positioned on its power base. Allow a short time after lling for the water to pass
through the lter.
4. Close the lid and then switch the kettle on. Make sure that the lid is closed correctly
to ensure safe operation.
5. When the kettle is switched on, the switch and the water level window will illuminate.
6. When the water reaches boiling point, the kettle will switch off automatically. The
water level window illumination will switch off.
7. You may also switch the kettle off manually at any time by moving the switch to the
off position.
Always use caution when carrying your kettle when it is full of boiling water and when
pouring it.
Energy saving hints and tips
A Breville kettle, if used correctly, is a very energy efcient device. Why not try some of
these energy saving tips:
• Only boil the water you need. Overlling your kettle by one cup is the equivalent to
using an energy saving light bulb for one hour!
• It is not always necessary to re-boil your kettle. For example, one litre of water will
still be at 90°C after ve minutes - the perfect temperature for a cup of coffee.
Ifthekettleboilsdry
If the kettle is operated with insufcient water a built in fail-safe device will automatically
switch off the kettle.
• Unplug the kettle and allow it to cool. When the kettle has cooled down sufciently
the device will reset itself.
• Once the device has reset, rell the kettle with cold water and use it as normal.