Instructions for use

before using for the first time

Please follow the information on the use of BRITA

lter cartridges and the BRITA

Memo

indicated in the BRITA

information guide.

1. Remove any packaging/promotional material from the kettle.

2. Always use your kettle on a dry, level, stable, secure work surface.

3. Open the lid and lift out the lter funnel. Wash it in warm, soapy water. Rinse and dry

thoroughly then replace the lter funnel.

4. Follow the section on preparing the BRITA

MAXTRA cartridge on page 6.

5. After preparing and installing the BRITA

MAXTRA cartridge, ll, boil then discard the

water twice. This will remove any residue left over from the manufacturing process.

Your BRITA

lter kettle is now ready for use. Note that you will only need to do this

procedure once and not each time you renew the BRITA

cartridge.

Before connecting to a power source, make sure your mains supply voltage is the same

as the one indicated on the appliance. Connect the plug to a suitable power outlet and

make sure that the power cord does not overhang the work surface.